Home - Return to Previous Page
Additional Images

Taillight Housing Kit - 1379496

Taillight Housing Kit, Not Including Lights / Fillers

1. Install steel weld-on light fillers (if applicable)

2. Position templates in desired location. Tack weld or screw to vehicle on both the top and bottom of template, making sure that the narrow end of the opening is toward the top.

3. Cut out the opening of the template using a plasma cutter, cutting wheel, or equivalent. The sheet metal of the vehicle must match the template cutout as close as possible. (REMOVE TEMPLATES)

4. Insert the taillight bucket into opening and position as desired. Make sure to place the bucket as level as possible so the light reflects straight back from the vehicle. You can adjust the depth of the taillight bucket based on your preference. Stitch weld the bucket into place.

5. Repeat process for the other side.

6. Cut and grind any excess material from buckets until it fits flush with the vehicle?s body.

7. Install the mounting clips to the top and bottom of each bucket by lining them up with the holes located in the buckets.

8. Pre-install the taillight assemblies by inserting the assembly first, the bezel, and then screws.

9. Using body work tools, fill any seams left on the buckets and prep for paint. Paint vehicle.Re-install the tailight assemblies.

Was: $103.99
Sale: $98.99



Not Including Lights / Fillers


Professional installation is recommended. Requires Cutting Welding.

Taillight Housing Kit Fits:
• 1994-1999 Cadillac Deville Sedan


  • 556711
  • 556711
  • Sir Michaels
  • New

Shipping Information

  • Item Requires Shipping
  • $29.99